Oil Seal Asw Sp 1 40X58X11 3 W Nbr Sog Tw
Home / Products / Oil Seal Asw Sp 1 40X58X11 3 W Nbr Sog Tw
Oil Seal Asw Sp 1 40X58X11 3 W Nbr Sog Tw
Oil Seal Asw Sp 1 40X58X11 3 W Nbr Sog Tw
Oil Seal Asw Sp 1 40X58X11 3 W Nbr Sog Tw
Oil Seal Asw Sp 1 40X58X11 3 W Nbr Sog Tw
Oil Seal Asw Sp 1 40X58X11 3 W Nbr Sog Tw

Oil Seal Asw Sp 1 40X58X11 3 W Nbr Sog Tw

The Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW is identified for a front, left fitting position and is listed for use at the drive axle. Its product designation includes the size 40x58x11.3 and the

Send Inquiry
Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW

Oil Seal ASW SP (1): Product Overview and Dimensions

The Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW is identified for a front, left fitting position and is listed for use at the drive axle. Its product designation includes the size 40x58x11.3 and the NBR SOG/TW description. The listed dimensions are an inner diameter of 40 mm, an outside diameter of 58 mm, and a width of 11.30 mm. These measurements are useful when checking a replacement against the original part and the available installation space.

This shaft seal is also described as a differential seal. Confirm the fitting position, application, and measurements against the vehicle or equipment requirements before ordering. A correct dimensional match helps ensure the seal is selected for the intended location and supports an orderly replacement process. The listing describes the supplied item as new: brand-new, unused, unopened, and undamaged in its original retail packaging.

The standard color is black. Product imagery is provided to help with visual identification, while the written dimensions and application details should be used for compatibility checks. Dimensions are measured by hand, so small deviations may occur. If an exact fit is critical, compare the stated figures with the relevant service information and the existing component before installation.

  • Fitting position: Front, Left
  • Type: Shaft Seal, differential
  • Placement on vehicle: Drive Axle
  • Inner diameter: 40 mm; diameter: 58 mm; width: 11.30 mm
  • Standard color: black
Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW

Material Properties and Operational Advantages

The listed advantages describe resistance characteristics relevant to choosing a seal for a working environment. The material is stated to offer good resistance to oil and fuels, which can be useful where the component is exposed to these substances during normal operation. It is also described as having good heat resistance up to 150℃ in oil. This stated value should be considered alongside the actual application conditions and the requirements for the equipment.

Good weather and ozone resistance are also listed. These properties can be relevant when a part may encounter environmental exposure during service or storage. Taken together, the stated resistance qualities help explain the intended material benefits, but they do not remove the need to check compatibility with the particular fluid, temperature, and operating environment. Select the seal based on the product details and the requirements of the specific installation.

The item specifics list the material as ACM (Polyacrylate), while the product title includes NBR. Because those material descriptions differ, verify the required material and exact part specification with the seller or the relevant application information before purchase if material identification is important for your use.

  • Good resistance to oil and fuels.
  • Good heat resistance up to 150℃ in oil.
  • Good weather and ozone resistance.
Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW
  • Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW
  • Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW
Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW

Important Limitations and Application Checks

This seal has specific material limitations that should be considered before selecting it. It is not suitable for contact with water or water solutions. The listed properties also include limited cold flexibility, limited tensile strength and tear resistance, and poor wear resistance. These factors matter when assessing the surrounding environment and the mechanical demands placed on the seal in service.

The stated chemical limitations include poor resistance against polar, aromatic, and chlorinated hydrocarbons. Do not assume compatibility with fluids or compounds in these categories; confirm the requirements for the intended application. Matching the seal to the operating environment is an important part of replacement planning and can help avoid choosing a component outside its described capabilities.

Before installation, compare the dimensions and vehicle placement details with the existing part and confirm that the product is appropriate for the service conditions. Consider the seal’s listed advantages together with its limitations rather than relying on one property alone. If application details are uncertain, contact the seller with the relevant product or vehicle information for clarification.

Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW

Item Specifics and OE/OEM References

The product specifications identify this part as a shaft seal for a differential, with placement on the drive axle. The swirl type is Alternating Twist, and the listing states that it is supplied with a dust lip. The material field specifies ACM (Polyacrylate); as noted above, this differs from the NBR text in the product title, so please verify the material required for your application.

  • Type: Shaft Seal, differential
  • Placement on vehicle: Drive Axle
  • Material listed in item specifics: ACM (Polyacrylate)
  • Swirl type: Alternating Twist
  • Dust cover: with dust lip

Reference OE/OEM numbers are provided to support part identification and cross-reference checks. Compare the applicable number and vehicle details before ordering; the references below are reproduced as listed and do not replace confirming fitment for the specific application.

AKRON-MALÒ: 11627P, 652PIAC; CITROËN: 312127, 96080067; ELRING: 128.250; FEBI BILSTEIN: 11414; FIAT: 9608006780; HUTCHINSON: 725123; PAYEN: NF836; PEUGEOT: 312127, 96080067; SWAG: 62911414

Oil seal ASW SP (1) 40x58x11.3 W NBR SOG/TW

Shipping, Product Notes, and Customer Support

Shipping information

Once you provide an effective shipping address and payment for the item is received, the order will be shipped on time. Please allow time for the shipping process after the order has been confirmed.

Measurement and color notes

All dimensions are measured by hand, so small deviations may occur. The color shown may vary slightly because monitor color settings differ. Use the listed measurements and specifications for product checks, and treat images as a visual reference rather than a substitute for confirming fitment.

Order assistance and contact

We control the quality of our parts and value customer satisfaction. If you encounter a problem with your order, please contact our service team before leaving an evaluation. We will be glad to review the issue and work toward a favorable solution.

For additional questions about the product or a request for more detailed item information, please get in touch. We will make every effort to help clarify the product details and address your inquiry.

Send an Inquiry

Related Products

Yjm Oil Sump Gasket 11 13 7 600 482
Yjm Oil Sump Gasket 11 13 7 600 482

Fitment The YJM oil sump gasket, reference 11 13 7 600 482, is listed for both left-hand-drive and right-hand-drive models. This fitment information is intended···

View Details
Yjm Oil Sump Gasket 11 13 7 511 224
Yjm Oil Sump Gasket 11 13 7 511 224

Fitment This YJM oil sump gasket is listed for the BMW vehicle applications below. Use the fitment information as a starting point when identifying a replacemen···

View Details
Seal Oil Filter Housing Engine Side Bmw Petrol 11427537293
Seal Oil Filter Housing Engine Side Bmw Petrol 11427537293

This product is identified as a seal for the engine-side oil filter housing on BMW petrol vehicles. The product reference is 11427537293. When servicing the oil···

View Details
Oil Sump Gasket 11137548031 Bmw
Oil Sump Gasket 11137548031 Bmw

BMW Oil Sump Gasket 11137548031 The oil sump gasket identified by part number 11137548031 is a BMW replacement part intended for use at the joint between the en···

View Details

Related News