Seal Type D Oil 9031634001 Toyota
Product Features Fitting position:Inlet Inner diameter 2 [mm]:34,5 Diameter [mm]:41,2 Height 1 [mm]:21,5 Material:ACM (Polyacrylate) Genuine Toyota motor oil is the engine oil formulated and approved
Send Inquiry
Product Features
Fitting position:Inlet
- Inner diameter 2 [mm]:34,5
- Diameter [mm]:41,2
- Height 1 [mm]:21,5
- Material:ACM (Polyacrylate)
What Is Genuine Toyota Motor Oil?
Genuine Toyota motor oil is the engine oil formulated and approved by Toyota for use in its vehicles. It is engineered to meet the requirements of Toyota engine designs, helping support performance, fuel efficiency, and long-term durability. Unlike generic oils, genuine Toyota motor oil is tested to Toyota’s quality standards and is designed to protect engine components across a range of driving conditions, including extreme temperatures, stop-and-go traffic, and high-speed operation.
A key feature of genuine Toyota motor oil is that it complies with or exceeds current industry certifications, including API (American Petroleum Institute) and ILSAC (International Lubricants Standardization and Approval Committee) standards. Many newer Toyota vehicles, particularly those with advanced engines and hybrid systems, require low-viscosity synthetic oils such as SAE 0W-20 or SAE 5W-30, which are commonly available in the genuine Toyota motor oil range. These oils help reduce internal friction, improve cold-start performance, and support fuel economy to meet modern environmental and efficiency requirements.
Genuine Toyota oil is available in synthetic and conventional formulations, although Toyota increasingly recommends full synthetic oil for most new models. Synthetic oil can last longer, resist heat-related breakdown, and provide added protection against sludge and wear. It can be especially beneficial in turbocharged or high-revving engines, where oil is exposed to greater stress. For example, vehicles with Turbocharged Dynamic Force Engines or Hybrid Synergy Drive systems can benefit from the stability and lubrication properties of genuine Toyota synthetic oil.
Using genuine Toyota motor oil also supports compatibility with the vehicle and warranty protection. Using the oil specified by Toyota helps ensure that the engine receives the oil it was designed for. This matters for maintaining warranty coverage, as engine damage caused by improper or low-quality oil may not be covered. Many Toyota dealerships and authorized service centers use genuine Toyota motor oil for routine maintenance, including oil changes, helping ensure vehicles are serviced to factory standards.
Genuine Toyota oil packaging often displays the Toyota logo and part numbers such as 00279-0WQTE-01 or 00279-1QT5W-01, depending on the oil’s viscosity and volume. It is typically sold in 1-quart or 5-quart containers and is also used for factory-fill applications in new vehicles. The oil is manufactured in partnership with reputable oil companies while following Toyota’s proprietary formula and specifications.
In summary, genuine Toyota motor oil is developed for Toyota engines and offers protection, performance support, and compliance with manufacturer and industry standards. Whether you drive a Corolla, Camry, RAV4, Tacoma, or a Lexus model, using genuine Toyota motor oil can help support engine life, smooth operation, and continued warranty coverage. Although many high-quality aftermarket oils are available, choosing genuine Toyota motor oil removes guesswork and provides confidence that the engine is protected as the manufacturer intended.
Toyota Corolla Oil Seal 9031634001
The Toyota oil seal 90316-34001 is a genuine OEM (Original Equipment Manufacturer) component designed to support the performance and reliability of various Toyota vehicles, including select Toyota Corolla models. This seal helps prevent oil from leaking from important engine or drivetrain components, particularly around rotating shafts such as the crankshaft, camshaft, or axle shafts. In the Toyota Corolla, it is commonly used in the transaxle assembly or around the drive shaft, depending on the engine and transmission configuration.
The primary function of oil seal 90316-34001 is to retain lubricating oil within the system while helping prevent dirt, moisture, and other contaminants from entering the component housing. It keeps oil in place to circulate around internal parts such as gears and bearings, helping reduce friction and prevent overheating. A properly functioning oil seal supports smooth vehicle operation and helps protect important mechanical components from premature wear or failure.
Made from high-quality rubber and metal materials, the 90316-34001 seal is designed to withstand extreme temperatures, exposure to oil, and high rotational speeds. Toyota manufactures the seal to precise specifications for a proper fit within the Corolla’s mechanical system. This fit supports durability, leak prevention, and reliable performance under varied driving conditions, from city traffic to highway speeds.
When oil seal 90316-34001 begins to fail, possible signs include oil spots under the vehicle, a burning smell from oil leaking onto hot components, or vibration and noise from the affected area. In the Toyota Corolla, a faulty drive shaft or axle seal may also cause a loss of transmission fluid, potentially affecting shift performance and leading to more serious mechanical issues if not addressed promptly. Replacing a worn oil seal is an important maintenance step that helps extend the service life of the transmission and drivetrain.
Genuine Toyota parts such as the 90316-34001 seal are recommended because they are designed and tested specifically for Toyota vehicles. Although aftermarket seals may cost less, they may not offer the same precision fit, material quality, and longevity as original Toyota components. Using a genuine seal helps maintain factory-level performance and may help preserve warranty coverage while the vehicle remains under the manufacturer’s warranty.
Installing the oil seal typically involves removing the drive shaft or axle from the transmission housing, cleaning the sealing surface, and carefully pressing the replacement seal into place with the correct tools. Follow Toyota’s repair procedures to help avoid damaging the new seal or creating alignment issues. Professional installation is recommended unless the owner has mechanical experience and access to the proper tools.
In conclusion, the Toyota oil seal 90316-34001 is a small but important component that helps keep a Toyota Corolla operating smoothly and efficiently. By helping prevent fluid leaks and contamination, it protects major systems such as the transmission and drive axles. Choosing a genuine OEM part provides quality, reliability, and peace of mind. Whether replacing a worn seal to address a leak or carrying out preventive maintenance, fitting genuine Toyota parts can be a worthwhile investment in the vehicle’s long-term condition.
Send an Inquiry
Related Products
Yjm Oil Sump Gasket 11 13 7 600 482
Fitment The YJM oil sump gasket, reference 11 13 7 600 482, is listed for both left-hand-drive and right-hand-drive models. This fitment information is intended···
Yjm Oil Sump Gasket 11 13 7 511 224
Fitment This YJM oil sump gasket is listed for the BMW vehicle applications below. Use the fitment information as a starting point when identifying a replacemen···
Seal Oil Filter Housing Engine Side Bmw Petrol 11427537293
This product is identified as a seal for the engine-side oil filter housing on BMW petrol vehicles. The product reference is 11427537293. When servicing the oil···
Oil Sump Gasket 11137548031 Bmw
BMW Oil Sump Gasket 11137548031 The oil sump gasket identified by part number 11137548031 is a BMW replacement part intended for use at the joint between the en···