11427508970 Bmw Oil Filter Housing Gaskets
Home / Products / 11427508970 Bmw Oil Filter Housing Gaskets
11427508970 Bmw Oil Filter Housing Gaskets
11427508970 Bmw Oil Filter Housing Gaskets
11427508970 Bmw Oil Filter Housing Gaskets
11427508970 Bmw Oil Filter Housing Gaskets
11427508970 Bmw Oil Filter Housing Gaskets

11427508970 Bmw Oil Filter Housing Gaskets

The 11427508970 BMW oil filter housing gasket is a replacement sealing part intended for the oil filter housing application. Its role is to provide a secure seal at the housing connection and help

Send Inquiry
11427508970 BMW - OIL FILTER HOUSING GASKETS

BMW Oil Filter Housing Gasket 11427508970

The 11427508970 BMW oil filter housing gasket is a replacement sealing part intended for the oil filter housing application. Its role is to provide a secure seal at the housing connection and help prevent oil from escaping at that interface. A correctly selected and properly installed gasket supports clean, dependable operation around the oil filter housing and helps maintain the intended sealing function of the assembly.

This product is identified by model number 11427508970 and OEM reference 11427508970. Keeping the part reference available when planning a repair or replacement can make it easier to compare the required gasket with the component being serviced. Since fitment depends on the vehicle and engine application, use the supplied model information as a starting point and confirm compatibility against the vehicle details and the part being replaced before ordering.

For a maintenance professional, workshop, or parts purchaser, an oil filter housing gasket is a small but important component within a larger service task. Replacing the gasket when required helps restore the sealing point without treating the entire housing as the replacement item. Review the housing contact surfaces and surrounding components during service, and follow the appropriate vehicle-specific repair procedure for removal and installation.

Features and Practical Benefits

The gasket is described as a high-quality oil filter housing gasket designed to provide a secure, leak-free seal for a BMW car’s oil filter housing. Maintaining a reliable seal at this location is important during everyday vehicle operation because the housing is part of the engine’s oil service system. A gasket suited to the application supports the integrity of the connection and can help avoid oil leakage associated with a compromised sealing interface.

  • Sealing function: designed to seal the oil filter housing connection and support leak-free operation when correctly matched and installed.
  • BMW application: listed as compatible with BMW models including E46 and E42. Confirm the specific vehicle and engine application before purchase.
  • Engine coverage stated in the product information: various engine types, including 3.0L and 6.0L applications. These references should be checked against the exact vehicle configuration.
  • Material and manufacturing: described as made from high-quality materials and manufactured to meet high standards for long-lasting, reliable performance.

Because the gasket functions at a joining surface, careful preparation and correct placement are important parts of the service. The replacement part should be compared with the removed gasket and the housing before installation. This practical check helps identify an incorrect application or mismatch before the repair is completed. The product information does not specify a particular installation method, so use the applicable BMW service instructions for the vehicle.

11427508970 BMW - OIL FILTER HOUSING GASKETS

Fitment and Maintenance Application

This gasket is intended for oil filter housing service where the specified 11427508970 part is required. It may be relevant during routine maintenance or when inspection indicates that the existing housing gasket needs replacement. Replacing a gasket as part of a suitable repair can address the sealing point while retaining the existing housing, provided that the housing and its contact surfaces are serviceable. The condition of related components should be assessed during the work rather than assuming that the gasket alone addresses every possible cause of an oil leak.

The listed car models are E46 and E42, and the product description also refers to engine types such as 3.0L and 6.0L. These are fitment references, not a substitute for checking a vehicle’s exact configuration. Before selecting the gasket, compare the part number, vehicle information, engine application, and existing component details. If fitment is uncertain, confirm the required reference with a qualified parts specialist or technician.

During installation, use clean, appropriate preparation of the relevant sealing surfaces and handle the replacement gasket carefully. Follow vehicle-specific instructions for access, assembly, and any required inspection after the service. Once the repair is complete, checking the area for signs of leakage during the appropriate post-service inspection is a sensible way to confirm that the sealing point is functioning as intended. No torque value, installation sequence, or additional vehicle-specific procedure is provided here; consult the applicable service documentation for those details.

Product Parameters and Ordering Details

Use the following product details when identifying this gasket for a maintenance job, workshop inventory, or replacement-parts enquiry. The model number and OEM reference both identify the product as 11427508970. The stated size is standard; no further dimensions are specified. The color is described as shown in the product picture.

  • Product name: Oil Filter Housing Gasket
  • Model number: 11427508970
  • OEM reference: 11427508970
  • Brand name: YJM
  • Car models listed: E46 and E42
  • Size: Standard
  • Color: As picture shows
  • Place of origin: Hebei, China

For accurate ordering, provide the 11427508970 reference and verify that it corresponds to the gasket required for the intended BMW application. The listed model names, engine references, standard size description, origin, brand, and color information are included to support product identification. Check all relevant details before purchase and before beginning installation, particularly where a vehicle has multiple possible engine or parts configurations. This helps reduce the chance of selecting a gasket that does not match the service requirement.

Send an Inquiry

Related Products

Yjm Oil Sump Gasket 11 13 7 600 482
Yjm Oil Sump Gasket 11 13 7 600 482

Fitment The YJM oil sump gasket, reference 11 13 7 600 482, is listed for both left-hand-drive and right-hand-drive models. This fitment information is intended···

View Details
Yjm Oil Sump Gasket 11 13 7 511 224
Yjm Oil Sump Gasket 11 13 7 511 224

Fitment This YJM oil sump gasket is listed for the BMW vehicle applications below. Use the fitment information as a starting point when identifying a replacemen···

View Details
Seal Oil Filter Housing Engine Side Bmw Petrol 11427537293
Seal Oil Filter Housing Engine Side Bmw Petrol 11427537293

This product is identified as a seal for the engine-side oil filter housing on BMW petrol vehicles. The product reference is 11427537293. When servicing the oil···

View Details
Oil Sump Gasket 11137548031 Bmw
Oil Sump Gasket 11137548031 Bmw

BMW Oil Sump Gasket 11137548031 The oil sump gasket identified by part number 11137548031 is a BMW replacement part intended for use at the joint between the en···

View Details

Related News