Toyota Seal Type T Oil 90311 48031
Home / Products / Toyota Seal Type T Oil 90311 48031
Toyota Seal Type T Oil 90311 48031
Toyota Seal Type T Oil 90311 48031
Toyota Seal Type T Oil 90311 48031
Toyota Seal Type T Oil 90311 48031
Toyota Seal Type T Oil 90311 48031

Toyota Seal Type T Oil 90311 48031

Features Inner Diameter [mm]: 48 Material: FPM (fluoride rubber) Swirl Type: Right-hand Twist Radial Shaft Seal Design: AS Dust Cover: with dust lip Height 2 [mm]: 7 Height [mm]: 10 Diameter [mm]: 68

Send Inquiry
Toyota SEAL TYPE T OIL 90311-48031

Features

 

Product Specifications

Inner Diameter [mm]: 48
Material: FPM (fluoride rubber)
Swirl Type: Right-hand Twist
Radial Shaft Seal Design: AS
Dust Cover: with dust lip
Height 2 [mm]: 7
Height [mm]: 10
Diameter [mm]: 68
Goods tariff number: 8484200000
Condition: New

This Toyota SEAL TYPE T OIL is identified by part number 90311-48031. The specifications above provide the key details for checking the part against a repair requirement, parts record, or service reference. The listed inner diameter, diameter, and heights are useful identification details; compare them with the information for the component being serviced rather than relying on appearance alone. The seal is new, and its listed material is FPM (fluoride rubber). Its design information also identifies a right-hand twist swirl type, AS radial shaft seal design, and a dust lip.

Oil Seal Purpose and Application

An oil seal is used at a rotating shaft or related interface to help retain lubricant and limit the entry of dirt and other unwanted material. In service, a correctly selected and installed seal supports the function of the assembly around it by helping maintain separation between the lubricated area and its surroundings. This product is described as a radial shaft seal, so its specification is relevant when identifying a seal for a shaft-sealing position that calls for the stated design.

The dust cover is listed as having a dust lip. That detail is important when reviewing a replacement: the product information identifies a feature intended to provide an additional barrier against dust at the sealing area. The right-hand twist swirl type is another stated design characteristic. These details should be considered together with part number 90311-48031 and the dimensions supplied, not treated as a substitute for checking the correct application.

The product title identifies Toyota and the seal type, but no specific vehicle, engine, position, or model-year compatibility is provided here. Confirm the required part using the applicable Toyota parts information or service documentation before ordering or beginning a repair. This approach helps avoid selecting a visually similar seal that does not match the intended position or service requirement.

Selection and Installation Considerations

Before installation, verify the part number and compare the stated measurements with the specification for the repair. The supplied figures are an inner diameter of 48 mm, a diameter of 68 mm, a height of 10 mm, and a second height of 7 mm. Keep each measurement associated with its label when checking against a parts catalogue or the seal removed from the assembly. If the reference information does not clearly match, pause and confirm the correct replacement rather than assuming dimensions or fitment.

A clean sealing area and careful handling are practical parts of seal replacement. Avoid damaging the sealing lip or introducing dirt while preparing the component and its surrounding area. Follow the service procedure for the specific assembly, including any instructions on orientation, installation tools, lubrication, or shaft preparation. No additional installation dimensions or procedure are specified in this product description, so consult the relevant service documentation instead of inferring those details from the product name.

After installation, the assembly should be checked as directed by its service procedure. If leakage or another concern remains, inspect the complete sealing area and verify that the selected part and installation meet the applicable requirements. The seal is one part of a larger system; its performance depends on appropriate selection, correct installation, and the condition of the components with which it operates.

Maintenance and Parts Identification

For maintenance planning, record Toyota part number 90311-48031 alongside the repair location and the service information used to confirm the replacement. Keeping the reference number with maintenance records can make future identification easier and help distinguish this seal from other parts. The product is listed as new and carries goods tariff number 8484200000. These identifiers can support purchasing and inventory processes, while the application and dimensional checks remain important for confirming suitability.

This page presents the stated product details without adding unlisted vehicle compatibility or installation specifications. Use the supplied material, design, dust-lip, and measurement information as a product-identification reference, then validate the application with the appropriate Toyota documentation or a qualified parts professional. Such a check helps ensure that the selected seal corresponds to the intended repair and supports dependable maintenance of the assembly.

Send an Inquiry

Related Products

Yjm Oil Sump Gasket 11 13 7 600 482
Yjm Oil Sump Gasket 11 13 7 600 482

Fitment The YJM oil sump gasket, reference 11 13 7 600 482, is listed for both left-hand-drive and right-hand-drive models. This fitment information is intended···

View Details
Yjm Oil Sump Gasket 11 13 7 511 224
Yjm Oil Sump Gasket 11 13 7 511 224

Fitment This YJM oil sump gasket is listed for the BMW vehicle applications below. Use the fitment information as a starting point when identifying a replacemen···

View Details
Seal Oil Filter Housing Engine Side Bmw Petrol 11427537293
Seal Oil Filter Housing Engine Side Bmw Petrol 11427537293

This product is identified as a seal for the engine-side oil filter housing on BMW petrol vehicles. The product reference is 11427537293. When servicing the oil···

View Details
Oil Sump Gasket 11137548031 Bmw
Oil Sump Gasket 11137548031 Bmw

BMW Oil Sump Gasket 11137548031 The oil sump gasket identified by part number 11137548031 is a BMW replacement part intended for use at the joint between the en···

View Details

Related News