Oem Oil Drain Plug Gaskets Washer 11026 01M02 For Nissan Qashqai Teana Livina
Reliable performance This copper oil drain plug gasket is designed to fit with the drain plug and create a sealing interface at the oil pan. The product is identified by Nissan OEM reference
Send InquiryOEM Oil Drain Plug Gasket Washer 11026-01M02
Reliable performance
This copper oil drain plug gasket is designed to fit with the drain plug and create a sealing interface at the oil pan. The product is identified by Nissan OEM reference 11026-01M02 and is presented for Nissan Qashqai, Teana and Livina applications. It is a practical service replacement to consider when carrying out routine engine oil maintenance and replacing a drain plug washer.
A correctly matched gasket helps seal the area around the oil drain plug after the plug is reinstalled. This matters during an oil change because the drain plug is removed to let used oil leave the pan, then fitted again once servicing is complete. The gasket sits between the plug and the oil pan sealing surface, supporting a secure fit and helping prevent oil from escaping around the plug.
The washer’s copper, crushable construction is intended for this drain-plug sealing purpose. When selecting a replacement, compare the stated size, plug fitment and reference numbers with the requirements for the vehicle being serviced. Confirming these details before installation helps ensure the washer is appropriate for the maintenance job and avoids relying on appearance alone when choosing a replacement part.
Function and Routine Oil-Change Use
Function
Located at the bottom of the oil pan, the oil pan plug gasket helps prevent oil from leaking around the oil drain plug. It provides a sealing component at the connection between the drain plug and the pan, making it an important small part to inspect during an oil service. A used or unsuitable gasket may not provide the intended seal, so replacement should be included in the service process when required.
These gaskets are usually disposable items and should be replaced with every oil change. Fitting a fresh gasket during routine maintenance supports consistent reassembly of the drain plug and helps reduce the chance of seepage at the plug area. It is also a straightforward way to avoid reusing a washer that has already been compressed in service. Always follow the vehicle’s appropriate service procedure when removing and reinstalling the plug.
For workshops, parts distributors and vehicle owners, keeping the correct replacement washer available can make scheduled oil service more complete. The gasket is used alongside the drain plug rather than as a substitute for the plug itself. Before completing the service, ensure the plug and mating area are suitable for reassembly, and check the area after the oil change as part of the normal maintenance review.
Dimensions and Drain Plug Compatibility
Description
Use the product details below when checking whether this copper crushable oil drain plug gasket matches the drain plug and service application. The listed measurements describe the washer, while the separate plug description identifies the stated oil drain plug thread fitment. Verify compatibility against the vehicle and the part references before ordering or installation.
|
11mm I.D. 17.5mm O.D. 3mm Thickness |
|
For 12-1.25mm Oil Drain Plugs |
|
Copper Crushable Oil Drain Plug Gaskets |
|
Ford # F4XY-6734-A Nissan # 11026-01M02 |
The listed references provide useful cross-checks for replacement sourcing: Nissan 11026-01M02 and Ford F4XY-6734-A. The specifications and references are presented as identification information; they do not replace confirming the correct application for a particular vehicle. Matching the inner and outer diameter, thickness, stated plug fitment and applicable OEM reference can help buyers and technicians select the intended washer for the repair or maintenance task.
Application and Cross-Reference Information
Application
The cross-reference list below includes manufacturer names and associated OEM or catalogue codes supplied for identification. It covers Nissan, Renault, Dacia and Ford references as well as aftermarket listings. Use these numbers as a lookup aid when matching a replacement gasket, and verify the intended fitment for the vehicle before purchase or installation. The listed vehicle makes indicate application coverage in the supplied information.
|
PRODUCENT |
OEM CODE |
|
|
AJUSA |
01140600, 18000900 |
|
|
BECK/ARNLEY |
016-0116 |
|
|
CORTECO |
005568H, 005568S |
|
|
DACIA |
11 02 601 M02, 77 01 474 516 |
|
|
ELRING |
691.82 |
|
|
FEDERAL MOGUL |
016-0116 |
|
|
NISSAN |
11026-01M00, 11026-01M01, 11026-01M02, 11026-31X00, 11026-JA00A |
|
|
PAYEN |
KG5353 |
|
|
RENAULT |
11 02 601 M02, 77 01 474 516 |
|
|
FORD |
F4XY-6734-A |
|
|
Installed in cars |
DACIA INFINITI LADA MINI NISSAN RENAULT Ford |
Application details and cross-reference codes are useful for procurement teams managing multiple replacement part numbers, as well as technicians checking a washer during routine servicing. The available information names Dacia, Infiniti, Lada, Mini, Nissan, Renault and Ford among the installed-in-car makes. Match the gasket to the specific vehicle and drain plug rather than assuming that every listed code applies to every model in those makes.
Send an Inquiry
Related Products
Yjm Oil Sump Gasket 11 13 7 600 482
Fitment The YJM oil sump gasket, reference 11 13 7 600 482, is listed for both left-hand-drive and right-hand-drive models. This fitment information is intended···
Yjm Oil Sump Gasket 11 13 7 511 224
Fitment This YJM oil sump gasket is listed for the BMW vehicle applications below. Use the fitment information as a starting point when identifying a replacemen···
Seal Oil Filter Housing Engine Side Bmw Petrol 11427537293
This product is identified as a seal for the engine-side oil filter housing on BMW petrol vehicles. The product reference is 11427537293. When servicing the oil···
Oil Sump Gasket 11137548031 Bmw
BMW Oil Sump Gasket 11137548031 The oil sump gasket identified by part number 11137548031 is a BMW replacement part intended for use at the joint between the en···


